How To Use And Maintain A Chainsaw?

(Last Updated On: May 27, 2020)

If you want to extend your chainsaw’s life, you need to maintain it properly. If you want it to operate safely, you have to follow useful tips. If you are a beginner, you need to know more about it, but even for a professional maintaining, a chainsaw is not an easy task. The best thing is that you get manuals with proper instructions, which will help you maintain the chainsaw. In this buying guide, we will discuss how to use and maintain a chainsaw.

Using A Chainsaw

Using a chainsaw is easy, and it doesn’t require any efforts from your side. To cut, you have to hold the front side of the handle. Keep your thumb wrapped underneath and grab the rear handle with your right hand. You need to maintain a good position before starting the process. You will get fine cuts when the engine becomes full. The best thing is to make a pose and start cutting at waist level near the height of your shoulder. The main thing you have to understand is that you should avoid cutting too close to the ground because the blade can dig in at regular intervals. If you get a kickback, it could be hazardous for a user. You have to cut downwards keep the bar at the bottom for smooth cuts. The cuts will be smooth even you are cutting big trees.

General Maintenance

If you want to maintain the excellent quality of the chainsaw, you should follow these simple tips. The first thing you need to do is turn the saw off and start with the maintenance process. The spark plug needs to be disconnected from the gas-powered chainsaw. If you are using an electric saw, it needs to be powered off from the primary source.

  • When you start using the saw, you have to keep the chain tension in check.
  • You can adjust the chain tension according to your requirements.
  • You have to inspect the bar regularly and clean it.
  • Checking the air filter and clean or replace it whenever necessary
  • The chain brake and catcher needs proper oiling.
  • If you still don’t understand you need to follow manual instructions

 

How To Sharpen & Maintain The Chain

The important thing is to keep the chain sharp, and again you will have to follow the manufacturer’s instructions to do this properly. Some chains require a specific sharpening device, but you have to understand that you can’t complete the sharpening process manually. Before starting the maintenance or sharpening process, you need to wear protective clothing and wear gloves. A unique maintenance tool kit consists of wrenches and screwdrivers, and a round file gauge is available for the user and its convenience. The best tip is never to cut using the tip of the saw because it is one of those areas which can cause an accident. When you handle the chainsaw properly and use it effectively, it will work for a long time.

 

 

Recommended Readings (Next Best Info)

Leave a Reply

Your email address will not be published. Required fields are marked *